1. Page header

1.1 Branding

back to top

back to top

1.6 Breadcrumb

1.4 Search

back to top

1.2 Main navigation

1.3 First level

1.4 Further levels

3. Turning

 

 

BD-3 Metal lathe, Ø 100 / 150 mm

 

  • Cast iron bed for vibration free operation
  • Bedways precision ground
  • Powerful DC-motor
  • Variable speed range 100-3800 rpm
  • Cross slide with adjustable dovetail guides

 

Data sheet

Sales Catalogue

 
BD-7 Metal lathe, Ø 180 / 300 mm

 

  • Solid cast iron design for vibration free operation
  • Headstock is supported by tapered roller bearings
  • Variable speed range 100 -3000 rpm in 2 steps
  • Left hand spindle rotation allows threading operations
  • Longitudinal feed

 

Data sheet

Sales Catalogue

 
BD-8 Metal lathe, Ø 210 / 450 mm

 

  • Headstock is supported by tapered roller bearings
  • Powerful brushless DC-motor
  • Variable 100 -2000 rpm speed range with forward/reverse rotation
  • Digital display of spindle speed
  • Digital display for cross and top slide travel
  • Backlash adjustments are provided throughout the carriage

 

Data sheet

Sales Catalogue

 
BD-920W Metal lathe, Ø 220 / 500 mm

 

  • Reversing gear for left and right hand thread cutting
  • Headstock is supported by tapered roller bearings
  • Headstock powered by belt drive with quick-change system
  • Forward/reverse rotation
  • Longitudinal feed

 

Data sheet

Sales Catalogue

 
GH-1440W-3 Metal lathe, Ø 356 – 508 / 1015 mm

 

  • Gear box makes it possible to cut a number of threads without changing the gears
  • Hardened and ground gears in headstock and gear box
  • Standard inch and metric graduation
  • Adjustable feed clutch
  • Spindle jog control, right/left hand operation

 

Data sheet

Sales Catalogue

 
GH-1640ZX Metal lathes, Ø 406 – 657 / 1015 mm

 

  • Induction-hardened and ground cast iron gantry bed
  • Pull-out bed gap section
  • Gear box makes it possible to cut a number of threads without changing the gears
  • Permanently lubricated main, feed and apron gear
  • Spindle jog control, right/left hand operation
  • Hardened and ground gears in headstock and gear box
  • Guides adjustable without play via V-ledges
  • Carriage guide Turcite-B coated
  • Central lubrication for carriage
  • Adjustable feed clutch
  • Transversal adjustment of tailstock for taper cuts
  • Tailstock sleeve and hand wheel with adjustable precision scale

 

Data sheet

Sales Catalogue

 
GH-1860ZX Metal lathes, Ø 460 – 698 / 1524 mm

 

  • Induction-hardened and ground cast iron gantry bed
  • Pull-out bed gap section
  • Gear box makes it possible to cut a number of threads without changing the gears
  • Permanently lubricated main, feed and apron gear
  • Spindle jog control, right/left hand operation
  • Hardened and ground gears in headstock and gear box
  • Guides adjustable without play via V-ledges
  • Carriage guide Turcite-B coated
  • Central lubrication for carriage
  • Adjustable feed clutch
  • Transversal adjustment of tailstock for taper cuts
  • Tailstock sleeve and hand wheel with adjustable precision scale

 

Data sheet

Sales Catalogue

 
GH-2060ZH Metal lathes, Ø 500 – 720 / 1530 mm

 

  • Headstock with mechanical clutches allowes slow spindle reversing for threading operations
  • Manual soft start reduces wear on gear and belts
  • Comfortable handling for long- and crossfeed over Joy-Stick with rapid buttonon
  • Induction-hardened and ground cast iron gantry bed
  • Pull-out bed gap section
  • Permanently lubricated main, feed and apron gear
  • Hardened and ground gears in headstock and gear box
  • Guides adjustable without play via V-ledges
  • Carriage guide Turcite-B coatedd
  • Central lubrication for carriage
  • Adjustable feed clutch
  • Transversal adjustment of tailstock for taper cuts
  • Tailstock sleeve and hand wheel with adjustable precision scale

 

Data sheet

Sales Catalogue

 
GH-2080ZH Metal lathes, Ø 500 – 720 / 2030 mm

 

  • Headstock with mechanical clutches allowes slow spindle reversing for threading operations
  • Manual soft start reduces wear on gear and belts
  • Comfortable handling for long- and crossfeed over Joy-Stick with rapid buttonon
  • Induction-hardened and ground cast iron gantry bed
  • Pull-out bed gap section
  • Permanently lubricated main, feed and apron gear
  • Hardened and ground gears in headstock and gear box
  • Guides adjustable without play via V-ledges
  • Carriage guide Turcite-B coatedd
  • Central lubrication for carriage
  • Adjustable feed clutch
  • Transversal adjustment of tailstock for taper cuts
  • Tailstock sleeve and hand wheel with adjustable precision scale

 

Data sheet

Sales Catalogue

 
GH-2280ZX Metal lathes, Ø 560 – 775 / 2032 mm

 

  • Induction-hardened and ground cast iron gantry bed
  • Pull-out bed gap section
  • Gear box makes it possible to cut a number of threads without changing the gears
  • Permanently lubricated main, feed and apron gear
  • Spindle jog control, right/left hand operation
  • Hardened and ground gears in headstock and gear box
  • Guides adjustable without play via V-ledges
  • Carriage guide Turcite-B coated
  • Central lubrication for carriage
  • Adjustable feed clutch
  • Transversal adjustment of tailstock for taper cuts
  • Tailstock sleeve and hand wheel with adjustable precision scale

 

Data sheet

Sales Catalogue

 
GH-26120ZH Metal lathes, Ø 660 – 870 / 3050 mm

 

  • Headstock with mechanical clutches allowes slow spindle reversing for threading operations
  • Manual soft start reduces wear on gear and belts
  • Comfortable handling for long- and crossfeed over Joy-Stick with rapid buttonon
  • Induction-hardened and ground cast iron gantry bed
  • Pull-out bed gap section
  • Permanently lubricated main, feed and apron gear
  • Hardened and ground gears in headstock and gear box
  • Guides adjustable without play via V-ledges
  • Carriage guide Turcite-B coatedd
  • Central lubrication for carriage
  • Adjustable feed clutch
  • Transversal adjustment of tailstock for taper cuts
  • Tailstock sleeve and hand wheel with adjustable precision scale

 

Data sheet

Sales Catalogue

 
GH-2680ZH Metal lathes, Ø 660 – 870 / 2030 mm

 

  • Headstock with mechanical clutches allowes slow spindle reversing for threading operations
  • Manual soft start reduces wear on gear and belts
  • Comfortable handling for long- and crossfeed over Joy-Stick with rapid buttonon
  • Induction-hardened and ground cast iron gantry bed
  • Pull-out bed gap section
  • Permanently lubricated main, feed and apron gear
  • Hardened and ground gears in headstock and gear box
  • Guides adjustable without play via V-ledges
  • Carriage guide Turcite-B coatedd
  • Central lubrication for carriage
  • Adjustable feed clutch
  • Transversal adjustment of tailstock for taper cuts
  • Tailstock sleeve and hand wheel with adjustable precision scale

 

Data sheet

Sales Catalogue

 
GHB-1330 Metal lathe, Ø 330 / 760 mm

 

  • Permanently lubricated main, feed and apron gear
  • Transverse adjustment of tailstock for taper cuts
  • Right and left-handed rotation
  • Adjustable feed clutch
  • Touch control operation

 

Data sheet

Sales Catalogue

 
GHB-1340A Metal lathe, Ø 330 – 476 / 1015 mm

 

  • Permanently lubricated main, feed and apron gear
  • Transverse adjustment of tailstock for taper cuts
  • Right and left-handed rotation
  • Adjustable feed clutch
  • Touch control operation

 

Data sheet

Sales Catalogue

 
Accessories & technical details

 

On the data sheets enclosed, you will find the matching accessories for all JET metal lathes as well as the technical details.

 

Data sheet

 
top

back to top

4. Right column

Printable version

News-Beitrag drucken

Printable version

print job offer

back to top